How Do I Thread My Brother Sewing Machine: Step-by-Step Guide

Threading a sewing machine can seem hard. But it is not. With practice, you will get it. This guide will help you. Follow the steps below. You will learn how to thread your Brother sewing machine.

Gather Your Supplies

Before you start, gather your supplies. You will need:

• A spool of thread
• A bobbin
• Your Brother sewing machine

Make sure your machine is turned off. This will keep you safe. Now, let’s start threading.

Thread the Top of the Machine

First, place the spool of thread on the spool pin. The spool pin is on top of the machine. Make sure the thread unwinds from the bottom. This is important.

Next, pull the thread to the first thread guide. The guide is near the spool pin. It looks like a hook. Place the thread under the guide.

Then, pull the thread down. You will see a tension disc. It is a small circle. Wrap the thread around the disc. This will help control the tension.

Now, pull the thread up. You will see a take-up lever. The lever moves up and down. Guide the thread through the lever. This is important for sewing.

Finally, pull the thread down again. You will see a needle bar. Guide the thread through the needle bar thread guide. The guide is above the needle.

Thread the Needle

Now it’s time to thread the needle. This can be tricky. But do not worry. Follow these steps:

1. Cut the end of the thread. A clean cut works best.
2. Hold the thread with both hands. Use your thumb and finger.
3. Guide the thread through the needle eye. This is a small hole.
4. Pull the thread through. Leave a long tail. About 6 inches is good.

Now, the top of the machine is threaded. Good job!

Credit: www.youtube.com

Thread the Bobbin

Next, you need to thread the bobbin. This part can be fun. Follow these simple steps:

1. Place the bobbin on the bobbin winder pin. The pin is on the top right.
2. Pull the thread from the spool pin. Wrap it around the bobbin winder tension disc.
3. Guide the thread through a bobbin hole. Pull it tight.
4. Push the bobbin to the right. This will engage the winder.
5. Turn on the machine. Press the foot pedal. The bobbin will wind.
6. Once full, cut the thread. Remove the bobbin.

Now, the bobbin is ready. Time to place it in the machine.

Insert the Bobbin

To insert the bobbin, follow these steps:

1. Open the bobbin cover. It is near the needle plate.
2. Place the bobbin in the bobbin case. The thread should unwind counter-clockwise.
3. Guide the thread through the slot. Pull the thread towards the back.
4. Close the bobbin cover.

The bobbin is now in place. The machine is almost ready.

Credit: support.brother.com

Bring Up the Bobbin Thread

Finally, you need to bring up the bobbin thread. This step is important. Follow these instructions:

1. Hold the top thread with your left hand.
2. Turn the handwheel towards you. This will lower and raise the needle.
3. The needle will catch the bobbin thread. Pull both threads towards you.
4. Make sure both threads are pulled to the back.

Now, your machine is threaded. You are ready to sew. Practice makes perfect. Keep trying until you feel comfortable. Happy sewing!

Frequently Asked Questions

How Do I Start Threading My Brother Sewing Machine?

Begin by raising the presser foot and turning off the machine. This ensures safety.

Where Is The Spool Pin Located On The Brother Sewing Machine?

The spool pin is on the top right of the machine. It’s easy to spot.

How Do I Thread The Needle On My Brother Sewing Machine?

Pass the thread through the needle’s eye from front to back. Use a needle threader if needed.

What Is The Correct Way To Wind The Bobbin?

Place the bobbin on the winder. Guide the thread through the guide and tension disc.

Conclusion

Threading a Brother sewing machine is easy. Just follow these steps. Soon, you will thread like a pro. Remember to be patient. Take your time. Enjoy your sewing projects!