How to Change the Pur Water Filter [A Step-by-Step Guide
Changing the Pur water filter is easy. It keeps your water clean. Follow these steps. You can do it yourself.
Why Change the Water Filter?
Water filters remove bad stuff. They make your water taste good. Over time, filters get dirty. They stop working well. Changing the filter keeps your water clean.
When to Change the Pur Water Filter
Check the filter indicator light. It shows when to change the filter. Usually, every two to three months. Or after filtering 100 gallons of water. Follow the guidelines to ensure clean water.
Credit: www.pur.com
Things You Need
- New Pur water filter
- Clean cloth
- Water
Step-by-Step Guide to Change the Pur Water Filter
Step 1: Remove The Old Filter
First, remove the old filter. Turn off the water. Twist the filter counterclockwise. Pull it out gently. Be careful. Water might spill.
Step 2: Clean The Filter Housing
Next, clean the filter housing. Use a clean cloth. Wipe away any dirt. Make sure it’s clean.
Step 3: Prepare The New Filter
Take the new filter out of the package. Remove any covers. It is now ready to install.
Step 4: Install The New Filter
Insert the new filter into the housing. Twist it clockwise. Make sure it is tight. It should fit securely.
Step 5: Run Water Through The Filter
Turn on the water. Let it run for five minutes. This clears out any loose particles. Your filter is now ready to use.
Troubleshooting Tips
Sometimes, things go wrong. Here are some tips to help.
Water Flow Is Slow
Check if the filter is installed correctly. Tighten it if needed. Make sure the water supply is on.
Water Tastes Bad
Run more water through the filter. Sometimes, it needs more flushing. If the taste does not improve, check the installation.
Benefits of Using a Pur Water Filter
Pur water filters remove many impurities. They make water taste better. They are easy to use. They are a good choice for clean water.
Credit: www.youtube.com
Frequently Asked Questions
How Often Should I Change My Pur Water Filter?
Change your PUR water filter every two to three months. This ensures optimal performance.
What Are The Signs My Pur Filter Needs Replacing?
Water flow slows down. Taste changes. Filter light indicator turns red.
Can I Reuse Or Clean A Pur Water Filter?
No, PUR filters are not reusable. Replace them with new ones.
How Do I Properly Dispose Of Pur Water Filters?
Recycle the plastic parts. Check local recycling guidelines for proper disposal.
Do I Need To Soak A New Pur Water Filter?
Yes, soak it in cold water for 15 minutes before use.
Why Is My Pur Filter Still Red After Changing?
Reset the filter indicator. Press the reset button for 5 seconds.
Conclusion
Changing the Pur water filter is simple. Follow these steps. Keep your water clean. Enjoy fresh water every day.