How to Take Water Filter Out of Frigidaire [Quick and Easy Guide]
Changing the water filter in your Frigidaire refrigerator is important. It keeps your water clean. It also makes your refrigerator work better. Here is a simple guide to help you.
Why Change Your Water Filter?
Dirty water filters can be harmful. They can make the water taste bad. They can also slow down the water flow. Changing the filter helps keep water safe to drink. It also helps your fridge work better.
Credit: www.youtube.com
When to Change the Water Filter?
Change the filter every six months. If you use a lot of water, change it sooner. If the water tastes bad, change the filter. If the water flow is slow, change the filter.
Tools You Need
- New water filter
- Dry cloth
- Bucket or towel
Types of Water Filters
Frigidaire has different types of water filters. The most common ones are:
- PureSource Ultra (ULTRAWF)
- PureSource 2 (WF2CB)
- PureSource 3 (WF3CB)
Credit: www.reddit.com
Steps to Take Water Filter Out
Step 1: Find The Water Filter
The water filter is inside the fridge. It is usually in the top right corner. Some models have it at the bottom. Check your fridge manual if you are not sure.
Step 2: Turn Off The Water Supply
Turn off the water supply to the fridge. This stops water from leaking. You can find the valve behind the fridge. Turn it clockwise to stop the water.
Step 3: Remove The Old Filter
Hold the old filter. Turn it counterclockwise. Pull it out gently. Some water may spill. Use a towel or bucket to catch it.
Step 4: Install The New Filter
Take the new filter out of the box. Remove any plastic covers. Insert the new filter into the slot. Turn it clockwise until it is tight.
Step 5: Turn On The Water Supply
Turn the water supply back on. Turn the valve counterclockwise. Check for leaks. If there are leaks, tighten the filter more.
Step 6: Reset The Filter Indicator
Most Frigidaire fridges have a filter indicator. It tells you when to change the filter. Reset the indicator by pressing the button for a few seconds.
Troubleshooting Tips
Problem: Water Tastes Bad
Solution: Check if the filter is installed correctly. Make sure it is tight. Run water through the new filter for a few minutes.
Problem: Water Flow Is Slow
Solution: Make sure the filter is not clogged. If it is, replace it. Check the water pressure in your house. It should be between 40-100 psi.
Frequently Asked Questions
How Do I Locate The Frigidaire Water Filter?
The water filter is inside the refrigerator, near the top right corner.
What Tools Do I Need To Remove The Filter?
You usually need no tools. Just your hands to twist and remove the filter.
How Often Should I Replace My Frigidaire Water Filter?
Replace the water filter every six months or after filtering 200 gallons.
What Should I Do If The Filter Is Stuck?
Try gently twisting the filter back and forth. You may need to use a cloth for grip.
Can I Reuse The Old Water Filter?
No, it’s best to replace the water filter with a new one for clean water.
How Do I Reset The Filter Indicator?
Press and hold the “Reset” button on your Frigidaire for three seconds.
Conclusion
Changing your Frigidaire water filter is easy. Follow these steps to keep your water clean. Remember to change the filter every six months. If you have problems, check the troubleshooting tips.
For more information, check your fridge manual. Or visit the Frigidaire website. Keeping your water filter clean helps you stay healthy. It also makes your fridge work better.