How to Change Water Filter in Whirlpool Refrigerator: Easy Guide
Changing the water filter in your Whirlpool refrigerator is important. It keeps your water clean and fresh. This guide will help you. Follow the steps below to change your water filter.
Why Change the Water Filter?
Water filters remove bad stuff from your water. This includes chlorine, lead, and other impurities. Over time, the filter gets dirty. This makes it less effective. Changing the filter ensures your water stays clean and healthy.
When to Change the Water Filter
Change your water filter every six months. If you use a lot of water, change it more often. Your fridge may have a light that tells you when to change the filter. Look for this light as a reminder.
Credit: www.ifixit.com
Steps to Change the Water Filter
Follow these steps to change your water filter. It is easy and quick.
Step 1: Find The Water Filter
First, find the water filter in your refrigerator. The filter is usually inside the fridge or at the bottom.
- Inside the fridge: Look in the upper right corner.
- At the bottom: Look behind the kick plate.
Step 2: Turn Off The Water Supply
Next, turn off the water supply. This is important. It prevents leaks. You can find the water supply valve behind the fridge. Turn it to the “off” position.
Step 3: Remove The Old Filter
Now, remove the old filter. Follow these steps:
- Inside the fridge: Twist the filter counterclockwise. Pull it out.
- At the bottom: Push the button to release the filter. Pull it out.
Step 4: Install The New Filter
It is time to install the new filter. Follow these steps:
- Inside the fridge: Insert the new filter. Twist it clockwise until it clicks.
- At the bottom: Insert the new filter. Push it until it clicks into place.
Step 5: Turn On The Water Supply
Turn the water supply back on. Turn the valve to the “on” position. Check for leaks. If you see any, turn off the water supply and check the filter again.
Step 6: Reset The Filter Light
Reset the filter light on your fridge. This step is important. It helps you remember to change the filter again.
- Press and hold the filter reset button for 3 seconds.
- The light should turn off.
Tips for Maintaining Your Water Filter
Here are some tips to keep your water filter in good shape:
- Change the filter every six months.
- Buy the correct filter for your fridge model.
- Run water through the new filter before use. This removes air and loose carbon.

Credit: www.youtube.com
Frequently Asked Questions
How Often Should I Change My Whirlpool Refrigerator Water Filter?
Change the water filter every six months or when the indicator light turns on.
Where Is The Water Filter Located In A Whirlpool Refrigerator?
The water filter is usually inside the refrigerator, near the top right corner.
What Tools Do I Need To Change The Water Filter?
You do not need any tools. Just your hands to twist and remove the filter.
How Do I Know If My Water Filter Needs Replacing?
Check for reduced water flow, strange taste, or the indicator light turning on.
Can I Use My Whirlpool Refrigerator Without A Water Filter?
Yes, but it is not recommended. The filter ensures clean and safe drinking water.
What Should I Do After Replacing The Water Filter?
Run water for a few minutes to flush out any air and impurities from the new filter.
Conclusion
Changing the water filter in your Whirlpool refrigerator is easy. Follow the steps in this guide. Your water will stay clean and fresh. Remember to change the filter every six months. This keeps your water healthy and tasty.